Publicité
Les langues disponibles
Les langues disponibles
Quick Guide
12
EN
All manuals and user guides at all-guides.com
k2evo704xy-2013-09
Insert direction pin (17) into the coupling
unit so that the „R" can be read from the
front on a right hand door and the „L" on
a left hand door during use.
NOTE: To help push in the direc-
tion indicator (17), the spindle of
the coupling unit (3) must be tur-
ned counter clockwise for a right
hand door and for a left hand door
it must be turned clockwise to the
dead stop!
NOTE: For a spindle of 7 mm, the
reduction sleeve must be fitted
such that the release for the sleeve
is pointing upwards towards the
fixing screw (4)!
Select the spindle (5) corresponding the
lock follower and insert it into the coup-
ling unit (3). Afterwards fix the spindle (5)
into the coupling unit (3) with the fixing
screw (4) from above. Connect the cord of
the coupling unit to the plug (18) and
place it into the outside shield (1). After-
wards put the centering sleeve (19) on the
lower thread sleeve.
ATTENTION! Take care of the cord!
Installation
Kaba c-lever
Publicité
