GE Lumination IS Serie Guide D'installation page 13

Dimming wires
AC wires
(black/white/green)
13
Reconnect thru wires according
to color (other wires not shown
for clarity).
How To Replace Light Engine in the Field
For Lumen Code [42][52][84][A0] Only
1
With a flathead screwdriver,
open access door.
4
Remove heatsink. Reverse steps
to install the new light engine.
(grey/purple)
14
Push wires into tray and
reattach cover.
2
Disconnect DC power.
15
3
13
Make sure no wires are pinched.
NOTE: Make sure all wires and
connectors and are properly
enclosed.
With a flathead screwdriver,
unsnap clip near the end.
Continue unsnapping
remaining clips.