Grundig ST 55-800 text Mode D'emploi page 12

The Audio Menu
Calling Up the Audio Menu
1 Press the
Audio menu.
Stereo, mono, two-channel
Stereo expansion –
!
After any adjustment, the Audio menu can be exited
by pressing the button.
Stereo, Mono and Two-channel Sound
Broadcasts
If your television receives two-channel sound trans-
missions, for example, when a film is broadcast in
the original sound track on sound channel 2 (DUAL
B) and the synchronized version is broadcast on
sound channel 1 (DUAL A), you can select the
desired channel.
Press P+ or P- to select the first menu line.
1
2 Press
channel.
If a stereo broadcast is received, the set switches
automatically to stereo sound.
!
If the stereo sound is poor (weak signal), press
–, +
!
The mono setting can be stored separately for every
programme position by pressing the OK-button.
Indication of the sound mode
Each time the station changes the sound transmis-
sion mode (e.g. from mono to stereo), the mode is
displayed for approx. 4 seconds.
This indication takes also place when changing the
programme, however only if the mode differs from
the mono mode.
Stereo Expansion
This function improves the acoustic pattern during
stereo broadcasts and improves the sound of mono
broadcasts.
1 Use the P+ or P- button to select the corresponding
menu line.
Adjust with the
2
expansion is retained even when changing the pro-
gramme position).
Treble, Bass, Balance
The settings of these functions can be corrected as
required.
Use the P+ or P- button to select the corresponding
1
menu line.
2 Adjust with the P+ or P- button.
12
All manuals and user guides at all-guides.com
and then the button to display the
–
STEREO MONO
...
Treble –
Bass –
f
Balance –
< >
Dialogue line –
–, + to select the desired sound
to switch to mono.
– or + button (the set stereo
Teletext
Call up Teletext:
press the TXT button.
Select pages directly with the 1...9
buttons.
(Available pages: 100-899)
Calling up contents page
Press button.
Call up dialogue line:
X /00
1 2 3
1 = Enlarge character height
= Bypass waiting times (actual mode).
2
3 = Directly call up subpage
4 = Reveal answer
= Stop page
5
Select the functions with the
call them up with the OK-button.
The functions 1, 3, 4, and 5 can also be selected
without calling up the dialogue line:
1 Enlarge character height: press the +
3 Directly call up subpage: press the –
4 Reveal answer: press the +
Stop page: press the
5
Selecting Pages by Means of the Cursor
(Page Catching)
i.e. without entering the page numbers. Move the
cursor to the desired Teletext page in an overview
page (pages containing three-digit page numbers).
Using this function, you need not type in the three-
digit page numbers.
1 Press the P+ or P- button.
"Page Catching" is displayed on the top screen
border.
A light spot (cursor) is flashing on the first or last
page number of the overview page.
Use the P+ or P- button to move the cursor to the
2
desired page number.
3 Press the OK-button.
The page appears on the picture screen.
Floftext
With Floftext the coloured buttons provide access
to the subjects indicated in the dialogue line.
press the AUX button.
? STOP
4 5
– or + button and
i
button.
i
button.
button.
– button.