Publicité
Les langues disponibles
Les langues disponibles
1st Possibility
The Automatic Tuning System ATS
This automatic tuning system scans the entire
reception range and automatically stores the
channels found in memory.
How to proceed:
1
Switch the TV set on from standby with one of the
buttons 1 ... 9.
2
Press for approximately 4 seconds on the P/C but-
ton to display the ATS menu.
Press the OK
3
The search can last longer than one minute. When it
has stopped, setting of the TV set is completed.
If you do not like the order in which the program-
mes are stored on the programme positions, you
can change this according to your preferences.
!
The search can be aborted using the button.
Changing the Programme Order
Example: you wish to move the programme stored
on position 2 to position 5.
1
Select programme position 2.
2
Press the P/C button. The programme menu is dis-
played.
3
Under "PR", enter the new programme position
number 05 as two digits with the buttons 1 ... 9.
Press the OK-button to terminate the adjustment.
4
Press the button to return to TV mode.
5
10
All manuals and user guides at all-guides.com
button to start the search function.
-
2nd Possibility
Direct Channel Entry
For this, you need to know the channel numbers of
the TV prgrammes.
!
If you have already assigned the programmes to the
programme positons with the help of the ATS func-
tion, this procedure is not required.
How to proceed:
Press the P/C-button to display the programme
1
menu.
!
Attention – this is not possible in the AV position.
PR
CH
22
S06
0-9
Press the
– or +
item.
2
Under "PR" press P+/P- to select the desired pro-
gramme position.
"
"CH"
enter channel number, (for special
channel, press P+ or P- to select "S"
instead of "C").
Press the +
red buttons to enter the required
channel number.
Hold down P+ or P- to start the chan-
nel search. This stops at each pro-
gramme being received.
"
"DEC" If an encrypted prgramme is allo-
cated to the programme position and
a corresponding decoder connected,
select "ON".
"
"FT"
If fine tuning should be necessary
after programme allocating, then
press P+ or P- until the best picture
and sound quality is obtained.
3
Press OK to store the modified settings.
The programme data of the next programme posi-
tion is displayed.
Press to return to the television picture.
4
!
If the channel number 00 is entered with P+ or P-
on one programme position, all following program-
me positions can no longer be selected.
DEC
FT
ON
00
OK
i
Dialogue line
button to select the desired
button. Use the numbe-
Publicité
