marklin 64 Serie Mode D'emploi page 8

Safety Notes
• This locomotive is to be used only with an operating system
designed for it (Märklin AC, Märklin Delta, Märklin Digital or
Märklin Systems).
• Use only switched mode power supply units and transformers
that are designed for your local power system.
• This locomotive must never be supplied with power from
more than one transformer.
• Pay close attention to the safety notes in the instructions for
your operating system.
• The feeder track must be equipped to prevent interference
with radio and television reception, when the locomotive is
to be run in conventional operation. The 74046 interference
suppression set is to be used for this purpose.
• Do not expose the model to direct sunlight, extreme changes
in temperature, or high humidity.
• WARNING! Sharp edges and points required for operation.
Important Notes
• The operating instructions and the packaging are a compo-
nent part of the product and must therefore be kept as well as
transferred along with the product to others.
• Maintenance, servicing, and repairs may only be done by
adults.
• Please see your authorized Märklin dealer for repairs or
spare parts.
• The warranty card included with this product specifies the
warranty conditions.
• Disposing: www.maerklin.com/en/imprint.html
8
All manuals and user guides at all-guides.com
Functions
• Recognition of the mode of operation: automatic.
• Addresses that can be set:
• Address set at the factory: 64
• Mfx technology for the Mobile Station / Central Station.
• Adjustable Acceleration delay (ABV).
• Adjustable Braking delay (ABV).
• Adjustable maximum speed.
• Various controllable functions.
• Volume can be changed for the sound effects.
• Setting the locomotive parameters (address, acceleration/
• Headlights, changing over with the direction of travel.
• Only the train control functions and headlight changeover
• World of Operation Mode
• A smoke generator can be retrofitted to the locomotive - also
Additional explanations about the World of Operation Mode can
be found in the supplemental instructions (included).
1-80 (Control Unit 6021/Mobile Station 60651/652)
1-255 (Central Station 6021x/Mobile Station 60653)
Name set at the factory: 64 236 DB
braking delay, maximum speed):
with the Control Unit, Mobile Station, Central Station.
feature are available in analog operation.
for analog operation.