Weidmüller PrintJet Mode D'emploi page 12

All manuals and user guides at all-guides.com
6. Replacing the ink cartridge
When replacing an ink cartridge, always open both ink cartridge lids.
Ink cartridges are sealed units. Under normal circumstances, ink will not leak out of an ink cartridge. If you get ink on your
hands, wash them thoroughly with soap and water. If you get ink in your eyes, rinse immediately with plenty of water.
Installing ink cartridges
1. Press the Replace ink cartridge button (2).
2. The print head will move to the middle position. Never move the print head manually per hand.
3. Press back the retaining clip of the ink cartridge to be replaced and lift the clamp upwards. Remove the used cartridge.
4. Remove the label with the inscription Entfernen / Remove from the new cartridge.
5. Insert the cartridge into the clamps (with the label showing face-up and the chip facing towards the input rail).
6. Carefully press the clamp downwards until it snaps into place.
7. Close the cover of the printer.
8. Press the Replace ink cartridge button (2).
Black ink cartridge Clean Unit
This activates the ink supply system; this process can take approximately 1 to 2 minutes. The print head will then move to its home position
(far right-hand side), and the operation indicator LED lights up continuously.
Never turn the printer off when the operation indicator LED is flashing!
11