Chauvet DJ EZgobo Manuel De Référence Rapide page 5

All manuals and user guides at all-guides.com
Before mounting the EZgobo™, read the Safety Notes in this QRG and make sure
that the mounting surface can support the weight of the product. The EZgobo™
can be mounted to metal using the magnetic base, or it can be attached to drop
ceiling runners with the scissor clip. When mounting overhead, always secure the
product using a safety cable such as CH-05 from CHAUVET®.
When using the magnetic base to mount the EZgobo™, attach the safety
cable to the safety loop on the back of the product.
The EZgobo™ comes with 10 wedding-ready gobos. The EZgobo™ can also be
used with any gobo that is 25.8 mm x 18.6 mm maximum image size. The gobo
can be made of thin metal or acetate transparency, or it can be made from
35 mm slides.
To replace the gobo, do the following:
1. Unscrew the gobo holder knob.
2. Remove the gobo holder.
3. Remove the expansion ring.
4. Drop the gobo out of the gobo holder.
5. Put the new gobo in the gobo holder.
6. Replace the expansion ring.
7. Replace the gobo holder.
8. Screw in the gobo holder knob.
5