Chauvet DJ EZgobo Manuel De Référence Rapide page 4

All manuals and user guides at all-guides.com
The EZgobo™ has an external power supply that works with a voltage range of
100–240 VAC, 50/60 Hz; it runs on 8.4 VDC, 1,000 mA.
The EZgobo™ comes with a rechargeable lithium battery. To charge the battery,
simply plug in the external power cord at any time before, during, or after
operation. You can charge the battery with the LED off by leaving the power
switch in the Off position. The indicator light on the external power supply turns
red while the battery is charging, then it turns green when the battery is fully
charged.
For optiomal battery life, charge the EZgobo™ battery for 24 hours prior to
initial use.
100% output
75% output
50% output
25% output
The EZgobo™ is compatible with the included CHAUVET® IRC-6. The
following IRC-6 buttons are used with the EZgobo™.
The EZgobo™ must be on and have a full battery, or be on and plugged into
a power source for the IRC-6 to work.
Up to 5 hours
Up to 8 hours
Up to 13 hours
Up to 16 hours
Turns the LED on and off
Increases the brightness of the LED 5 levels
Dims the brightness of the LED 5 levels
4
4 hours