Publicité
Les langues disponibles
Les langues disponibles
Integrated terminal plug:
If no XLR connector is detected on DMX OUT connector, a 120Ω terminal plug is automatically
activated. Additional terminal plug on the last unit is not necessary.
•
Protocol: Wireless Solution W-DMX
•
Refer to the OEM User's manual for general
recommendations and use of the transmitter :
http://www.wirelessdmx.com
•
The antenna must be clearly visible from the transmitter
•
Refer to RJ-LED Software manual for activation procedure
(page EN-18)
•
Do not connect a DMX IN data cable in case of
wireless DMX use
DMX mode:
The first unit receives the DMX signal via the wireless network, then all the other units are
connected o the first one via DMX data cable
All manuals and user guides at all-guides.com
Wireless DMX option
TM
- 8 -
EN
Maximum:
32 units
Publicité
