Fox EVO HIDEOUT Mode D'emploi page 6

GB
10. To dismantle the Evo Hideout, unhook the tension elastics if they
have been used, and remove all pegs. Standing at the front of the
Evo place a hand on top of the boss and apply gentle downward
pressure, tilting the boss towards you. At the same time lift the
front pole slightly upwards and slide out. Repeat for the other front
pole.
8
All manuals and user guides at all-guides.com
11. Disconnect the rear poles.
12. Remove the short centre pole. This should be
done by lightly pressing down on boss and
centre pole to decrease the tension. As the centre
pole straightens it is simply disconnected from
the two bosses. Store the pole inside one of the
front mesh tunnels.
13. Gather all of the poles together and roll the Evo
Hideout up, storing it in the supplied sleeve.
GB
9