Fox EVO HIDEOUT Mode D'emploi page 4

GB
Assembly Instructions
Side Pole
Rear Poles
1. Holding the tips of the aluminium poles, fan the Evo Hideout
out as shown (full assembly of the Evo is carried out while
standing in this position at the front).
4
All manuals and user guides at all-guides.com
Pair of sockets face the front
Left hand side pole
Side Pole
2. The solid bosses should be fitted to
the tip of each of the side poles. Each
pole should be fitted so that the
bosses have the pair of sockets
facing towards the front of the Evo
Hideout. This Picture shows the boss
fitted to the left hand pole with
sockets facing in correct position.
3. Taking the short centre pole, 4. Tension the Evo Hideout and
locate it into one of the connect the centre pole into
bosses. Fit it into the block the other boss.
socket on the opposite to
where the side pole locates.
GB
5. Insert the two rear poles into
the boss sockets as shown.
5