PR electronics LOOP LINK 5909 Mode D'emploi page 11

PROGRAMMING:
During programming, the measuring and connection of external voltages must
be carried out according to the specifications of this manual and the manual for
the unit to be programmed.
The technician must use tools and instruments that are safe to use.
NORMAL OPERATION:
Operators are only allowed to adjust and operate modules that are safely fixed
in panels, etc., thus avoiding the danger of personal injury and damage. This
means there is no electrical shock hazard, and the module is easily accessible.
CLEANING:
When disconnected, the module may be cleaned with a cloth moistened with
distilled water.
LIABILITY:
To the extent that the instructions in this manual are not strictly observed, the
customer cannot advance a demand against PR electronics A/S that would
otherwise exist according to the concluded sales agreement.
18 18
All manuals and user guides at all-guides.com
As manufacturer
hereby declares that the following product:
is in conformity with the following directives and standards:
EMC directive 2004/108//EC and later amendments
For specification of the acceptable EMC performance level, refer to the
electrical specifications for the module.
The Low Voltage Directive 2006/95/EC and later amendments
Rønde, 31 May 2007
EC DECLARATION OF CONFORMITY
PR electronics A/S
Lerbakken 10
DK-8410 Rønde
Type: 5909
Name: Loop Link
EN 61326
EN 61010-1
Peter Rasmussen
Manufacturer's signature
19 19