Publicité
Les langues disponibles
Les langues disponibles
First use
It is imperative to observe the safety instructions supplied!
Remove all transport protection materials and the black protective
cover from the umbrella reflector before switching on the lamp.
Attach and remove light shapers
To remove, first rotate the light shaper until it stops firmly,
this ensures it is in its 'pre-release' position. Pull the locking slide
back with one finger and engage the small silver locking pin on
the slider. Then carefully rotate the light shaper in the same
direction as before until you feel the bayonet disengage. Pull it
away from the lamp taking care not to damage or scratch the
ar
diffusion attachment.
da
de
el
en
es
fi
Attaching is also very easy:
fr
To attach light shapers, align bayonet with the small notch at the
top and large notch at the bottom. Push firmly into the receptacle
id
on the front of the lamp and rotate until you hear the 'click' of the
it
locking mechanism.
ja
Mounting an umbrella
nl
en
Insert the umbrella shaft into the holder located on the stand mount
at the bottom of the lamp.
ru
zh
4
All manuals and user guides at all-guides.com
(not included)
Use with a light stand
Mount the LED F160 lamp on a suitable light stand. The light stand
mount is located at the bottom of the device.
Switching the lamp on and off
First connect the connection cable of the LED F160 lamp to the cable
permanently attached to the power supply unit. Now connect the
supplied power cable to the power supply unit. Then plug the mains plug
into a suitable socket.
To switch off, please unplug the mains plug from the socket.
The mains plug is used as a disconnect device, the disconnect device
shall remain readily operable.
Control display
The control display identifies three main functions:
- Output Power
- Colour Temperature
- Green / Magenta Correction
To adjust, rotate the main control knob until the desired function is
selected, and press. The main control knob will then allow you to change
the settings of that function. Press it to confirm your setting.
Further information
You can download a complete operating manual and a list of recommend-
ed accessories at the following link:
www.broncolor.swiss/LEDF160
ar
da
de
el
en
es
fi
fr
id
it
ja
nl
en
ru
zh
5
Publicité
