Suzuki 46200-4481 Serie Instructions D'utilisation page 5

3. Remove the STD bolts ⓔ and the
rear carrier.
The bolts ⓔ will be reused later.
4. Temporarily install the Pillion Rider
Handle ① to appropriate position
by using the STD bolts ⓔ remo-
ved in step 3 and then be sure to
tighten them.
5. Reinstall the removed STD parts
in the reverse order of removal.
After all processes finished, be
sure that all component parts
are fixed in appropriate position
and tightened firmly.
GENUINE SUZUKI ACCESSORIES
STD bolt ⓔ: 21.0N·m
( 2.1 kgf-m, 15.5 lbf-ft )
ⓔ
ⓔ
ⓔ
5/5
rear
carrier
①
ⓔ