BDS Maschinen MAB 450 Mode D'emploi page 21

All manuals and user guides at all-guides.com
www.bds-maschinen.de www.bds-maschinen.de www.bds-maschinen.de
20
The drill is suitable for drilling work in metal.
Please see data sheet for performance data.
Insertion of core drills:
Clamp the core drill in the Keyless quick change arbor by moving the
sleeve upwards and inserting the correct drill together with the ejector
pin into the chuck.
Turn the core drill a little in order to check that the clamping jaw is
engaged.
Switch the motor on
Press on I of the Motor switch.
Speed setting MAB 450:
The machines are provided with a gear with two mechanical gear
stages
-1 -1
1. - 250 min 2. - 450 min
info@bds-maschinen.de info@bds-maschinen.de info@bds-maschinen.de