Samsung LE23R3 Manuel D'instructions page 10

Storing Channels Manually
You can store up to 100 channels, including those received via cable networks.
When storing channels manually, you can choose:
Whether or not to store each of the channels found.
The programme number of each stored channel which you wish to identify.
1. Press the MENU button to display the menu.
Press the or button to select "Channel", then press the ENTER button.
2. Press the or button to select "Manual Store", then press the ENTER button.
3. Press the ENTER button to select "Programme".
4. To assign a programme number to a channel, find the correct number by pressing the
and then press the ENTER button.
You can also set a programme number by pressing number buttons on the remote control.
5. Press the or button to select "Colour System", then press the ENTER button.
6. Select the colour standard required by pressing the
7. Press the or button to select "Sound System", then press the ENTER button.
8. Select the sound standard required by pressing the
If there is an abnormal sound or no sound, re-select the sound system required.
9. If you know the number of the channel to be stored, press the
Press the ENTER button. Select C (Air channel) or S (Cable channel) by pressing the
Press the button to select channel. Select the required number by pressing the
press the ENTER button.
Channel mode: P (Programme mode), C (Air channel mode), S (Cable channel mode)
You can also set a channel number by pressing the number buttons on the remote control.
10. If you do not know the channel numbers, press the
ENTER button. Search by pressing the
11. Press the or button to select "Store". Press the ENTER button to select "OK".
12. Repeat steps 3 to 11 for each channel to be stored.
Programme: Selects a program number for the channel.
Colour System: Sets the colour supporting system.
Sound System: Sets the sound supporting system.
Editing the Channels
You can exclude the channels you chose from the channels you scanned. When you scan through
the stored channels, those you have chosen to skip are not displayed.
All channels that you do not specifically choose to skip are displayed during scanning.
1. Use the number buttons to directly select the channel that will be added or deleted.
2. Press the MENU button to display the menu.
Press the or button to select "Channel", then press the ENTER button.
3. Press the or button to select "Add/Delete", then press the ENTER button.
4. Repeatedly pressing the ENTER button will alternate between add channel and delete channel.
5. Press the P / buttons to switch to the appropriate channel, then repeat above.
6. Press the EXIT button to exit.
You can view any channel (including an erased channel) by using the number buttons on the remote control.
All manuals and user guides at all-guides.com
or button and then press the ENTER button.
You can also add or delete channel by simply pressing the ADD/DEL button on the
remote control.
English-8
or button then, press the ENTER button.
or button, then press the ENTER button.
or button to select "Channel".
or button to select "Search". Press the
Channel: Selects a channel.
Search: Scans for the frequency value for the channel.
Store: Saves your settings.
or button
or button.
or button and then