Reversing The Door Handles - Whirlpool Kirkland Signature ST18PKXHW00 Guide D'utilisation

Reversing the Door Handles

1. Remove freezer handle assembly as shown. Keep all
parts together.
2. Remove refrigerator handle bottom screw. Pry off
screw cover and remove screw.
3. Remove refrigerator handle assembly as shown. Keep
all parts together.
To reinstall freezer handle:
1. Position freezer handle on opposite side of freezer door
and install top two screws.
2. Install bottom two screws.
3. Tighten all screws.
To reinstall refrigerator handle:
1. Unscrew hole plug refrigerator door and screw it into
place on the opposite side.
2. Position the refrigerator handle on the refrigerator door
and attach it at the top with two screws.
3. Align the lower portion of the handle and attach it to the
refrigerator with one screw.
4. Replace refrigerator handle bottom trim. Position screw
cover over the screw and push/snap it into place.
1. Plugs
2. Countersink Screw
3. Top Endcap
4. Stick on Shim
5. Bottom Endcap
6. Handle Screw
7. Screw Cover
8. Plug
9