Graco AFFIX Notice De L'utilisateur page 15

d in a
collision.
DENT OF
ter seat that
any
onstitutes an
ler for Graco
water. No
EAT for worn
DO NOT try to
All manuals and user guides at all-guides.com
EN GB
GB
GB
GB
Always keep this Owner's Manual with the booster seat. Provisions are made
Assembling the booster seat
on the bottom of the seat shell.
1
Flip head support and lower back support over as shown.
European Standard
Your booster seat has been approved to European Standard ECE R44.04
Squeeze red adjustment button and slide two pieces together until they
2
Universal Group 2,3 15-36kg
snap into place.
An approved number is attached to the seat shell and must not be removed.
CHECK to make sure two pieces are securely snapped together by pulling
on them.
belts, approved to ECE Regulation No.16 or other equivalent standards.
Attach elastic strap as shown.
3
Flip seat over and insert the fabric from the head support underneath the
4
fabric on the lower back support as shown.
To make insertion of fabric easier, slide the upper and lower back pieces
apart by squeezing the red adjustment button.
Attach backrest to base. "U"-shaped hooks on bottom of backrest will
5
interlock with bars on base.
Make sure that no part of the seat covering interferes when attaching
backrest to the base.
Once backrest is securely attached to the base, push backrest up as shown.
6
Your Graco booster seat is now ready to use. See "Using your Graco
7
Booster Seat" and "Securing Your Child in Vehicle".
12
15
15
liable to bec
IT IS MOST
with the lap
armrests and
Ensure the b
e vehicle s
should be tig