Kessel 230V Monol 230V Duo Instructions D'installation Et D'utilisation page 26

Remove nut (connector) and protective cap.
Align cable arrow on arrow and push on.
Tighten the connector so that the spacer ring connects
flush. If a spacer ring is not fitted, note tightening torque
of 3 Nm.
If the torque is correct, the gap between the nut and
hexagonal body is 3-4 mm, if a spacer ring is not fitted.
26 / 108
All manuals and user guides at all-guides.com
Aqualift Comfort
1
3
2
19mm
=4mm
19mm
≈ 3Nm
010-910_02