Publicité
Les langues disponibles
Les langues disponibles
Installation Instructions
INSTALLING THE REFRIGERATOR (Cont.)
17
TURN ON THE WATER SUPPLY
Turn the water on at the shutoff valve (house water
supply) and check for any leaks.
18
PLUG IN THE REFRIGERATOR
See the grounding information attached to the
power cord.
LEVEL THE REFRIGERATOR
19
The leveling legs have 2 purposes:
1. Leveling legs adjust so the refrigerator is firmly
positioned on the floor and does not wobble.
2. Leveling legs serve as a stabilizing brake to
hold the refrigerator securely in position during
operation and cleaning. The leveling legs also
prevent the refrigerator from tipping.
Turn the leveling legs clockwise to raise the
refrigerator, counterclockwise to lower it.
NOTICE: To avoid possible property damage, the
leveling legs must be firmly touching the floor.
49-1000712 Rev. 0
Raise Flat-Head
Screwdriver
20
LEVEL THE REFRIGERATOR
DOORS
Remember a level refrigerator is necessary for
getting the doors perfectly even. If you need
help, review the previous section on leveling the
refrigerator.
When the left
door is lower
than the right
door.
For 2 drawer models:
1. Access the hinge
screws by opening the
convertible drawer.
2. Insert 1/4" Allen wrench
into the shaft of the
center hinge.
3. Adjust the height by
turning clockwise or
counterclockwise.
When you turn
counterclockwise,
the door will move
up.
For 4 door models:
Using a ¼" open end
wrench or flat-head
screwdriver, turn the
slotted wheel to adjust
doors up or down.
To adjust the height of the lower doors:
right-hand hinge covers with
a Phillips head screwdriver,
then use a 9/16" open end
wrench to adjust the doors
up or down.
When the
left door is
higher than
the right
door.
Adjustment
points
Adjustment
points
29
Publicité
