Medisana PS 425 Mode D'emploi page 17

3 Operation
3.1
Before you start up your digital scale, insert the three provided 1,5V
Insert/re-
batteries (type AAA) into the device. To do this, open the battery
place
compartment
batteries
sure the polarity is correct (as shown in the battery compartment).
Put the lid of the battery compartment back on and push it until it
clicks into place. Change the batteries when the battery change
symbol „Lo" appears inthe display or when nothing is shown in
the display after the device is switched on.
3.2 Change unit of weight
Select the Shortly press your foot on the middle of the scale surface. „0.0"
unit appears in the display. You now may select the weight units (kg -
of weight lb) with the shift key for setting the weight unit
and key!
language
Change language
Shortly press your foot on the middle of the scale surface. „0.0"
appears in the display. With the shift key
you may select the desired language for the audio output: (German
[DE], English [GB], French [FR], Spanish [ES]). Press the key multiple
times.
With the dial
If you do not do anything else, the scale switches off after approx. 10
seconds automatically. It is now ready for the „step-on" function.
3.3 1. Make sure the scale is placed on a firm, level surface. If you want to
Weighing /
„Step-on"
function
2. Step onto the scale and stand still. The device switches on automatically.
3. Your weight is measured, is then displayed and announced acoustically
4. Step down from the scale. The scale switches off automatically after ap-
beneath the device and insert the batteries. Make
1
you may adjust the output volume at any time.
2
weigh yourself but have moved the scale just before, you must first
initialise the scale. To do this, shortly press your foot on the middle of
the surface of the scale. „0.0" appears in the display. After the scale
switched off automatically, it is ready for the „step-on" function. This
procedure is not necessary if you have not moved the scale.
at the same time.
prox. 10 seconds if you do not do anything else.
3 Operation
. Press and hold the
3
for setting the language
3
GB
17