Publicité
Lubrication
Ingersoll- - Rand No. 50
Ingersoll- - Rand No. 115- - 1LB for routine external
lubrication of the impact mechanism through the Hammer
Case Grease Fitting.
Use Ingersoll- - Rand No. 105- - 1LB or Ingersoll- - Rand
105- - 8LB when disassembling and assembling the impact
mechanism.
Always use an air line lubricator with these tools. We
recommend the following Filter- - Regulator- - Lubricator
(FRL) Unit:
For USA use Unit Number C18- - 03- - FKG0- - 28
For International use Unit Number C28- - C3- - FKG0
Do not mark any nonmetallic surface on this tool with
customer identification codes. Such actions could affect
tool performance.
Model
IR-C2131
pistol grip
SERVICING THE TOOL
SPECIFICATIONS
Type of
Drive
Handle
1/2"
Main Line(s) Inner Ø
to be 3X Size of
Air Tool's Inlet Ø
To Air
System
To Air
Tool
L
Emergency
Shut--Off
Valve
Lubricator
Regulator
Drain Regularly
Impacts
per min.
Forward
ft- - lb (Nm)
50- - 400 [450 Max.]
1,250
(68- - 542 [610 Max.] )
4
Branch Line(s) Inner Ø
to be 2X Size of
Air Tool's Inlet Ø
R
F
Filter
FRL
Compressor
(Dwg. TPD905- -2)
Recommended
Torque Range
Reverse
ft- - lb (Nm)
550 [600 Max.]
(746 [813 Max.] )
Publicité
