Product Overview - newmotion Home Basic Edition 7 Manuel D'installation

2. PRODUCT OVERVIEW

2.1 MOUNTING, PACKAGE CONTENTS AND REQUIRED TOOLS
Wall mounting
Optional: Pole
mounting
Optional: Concrete
base (for in soil) for
pole
Installation materials
& power setting
Installation &
configuration of
accessories
INSTALLATIEHANDLEIDING – P17
INSTALLATION MANUAL – P17 | P17
Package contents charge point
- Charge point;
- Rubber grommets (various sizes);
- 2x Plastic spacers;
- 1x M4 x 16 mm bolt (Torx);
- 6x M4 x 12 mm bolts (Torx)
- 4 x M8 x 12 mm bolts (Torx) plus
washers;
- 4 x M8 x 35 mm bolts (HEX DIN 912)
plus washers;
- 2x Power cable clamps;
- 2x UTP data cable inlet with rubber seal
- Current Tranformer for Dynamic Power
Management functionality;
VERSION 0129NM02INT01
06ANM20INT01
Required tools & additional
materials (not provided)
- 4x 6.3mm x 70mm self tapping pan
head screws (DIN 7981C) stainless steel
(A4);
- 4x plugs;
- 4x stainless steel (A4) washers;
- Drill and bit;
- Torx screwdrivers (T20);
- Voltage tester;
- Tape measure;
- Spirit level
- All mentioned for standard mounting,
plus;
- Pole (sold separately);
- 4 x M8 wedge bolts or chemical
anchors, plus nuts and washers;
- All mentioned for pole mounting, plus;
- Concrete base (sold separately);
- DIN 912 HEX allen key (Size 6);
- Shovel;
- Power cable;
- Cable mount clips;
- RCD & MCB
- For Dynamic Power Management
functionality:
cable with 2 x Ø 1,5mm
2
- Cable mount clips
(minimum);