Publicité
Before using the snow thrower, check all parts for damages and do not
use a damaged machine. Make sure all moving parts are working properly.
Only use the snow thrower in daylight or under adequate artificial lighting.
During operation hold the snow thrower tightly with your hands.
Remove all objects and obstacles from the area where the snow thrower is
to be used; otherwise foreign objects will be drawn in. Make sure the area
where the snow thrower is to be used is free from doormats, sleds, toys
etc.
Use extra caution when approaching blind corners, shrubs, trees, fences
or other objects that may obscure vision. Be careful when working close to
window walls, cars etc. Adjust the snow discharge angle accordingly.
Mind the soil conditions and avoid slipping or falling especially when
operating the snow thrower in reverse.
If the snow thrower becomes clogged by an obstacle, immediately release
the push bar for the rotating auger (17) and switch off the machine witch
the ON/OFF switch (8).
Secure the snow thrower against rolling away. Do not operate the snow
thrower across to the slope. There is risk of tipping over. Be very careful
when working on slopes. Do not attempt to clear steep slopes.
Do not touch the spark plug and the muffler during operation. There is risk
of electric shock and burns. Do not touch the hot engine or the muffler.
There is risk of burns.
Keep the engine level when transporting to reduce the possibility of fuel
leakage.
Always use caution when handling fuel. Fuel is highly flammable and can
cause serious injury or property damage.
Only fill unleaded regular or premium petrol in the tank and do not use
stale petrol. Do not use contaminated petrol or oil/gas mixtures. When
adding fuel in the tank make sure dirt and water cannot get into the tank.
Do not overfill the tank.
Switch off the engine and let it cool down for approx. 2 minutes before
adding fuel. Never add fuel to a running engine.
Keep the snow thrower away from all sources of sparks or flames. Do not
smoke while handling with fuel.
Please note that if fuel is accidentally spilled and may be ignited by a
single spark, there is risk of fire. When handling with fuel make sure not to
spill fuel. Wipe up all spills and start the snow thrower at least 3 m away
from the fuelling point.
All manuals and user guides at all-guides.com
Safety Notes
7
Publicité
