Aiwa CDC-X937 Mode D'emploi page 8

OTHER FUNCTIONS
+ / – /r/t
SRC(SOURCE)
S(SEL)
Changing the display contrast
1
Press and hold SRC (SOURCE) until "CONT."
appears on the display.
2
Press + or - to adjust the contrast.
Changing the key illumination color
You can choose blue or red as the key illumination color.
1
Press and hold SRC (SOURCE) until "CONT."
appears on the display.
2
Press t or r until "ILL" appears on the display.
3
Press + or - to select "1 (for blue)" or "2 (for red)".
Setting the dimmer of the display
1
Press and hold S (SEL) until "DIMMER" appears on
the display.
2
Press + or - to select "0 (bright)" or "1 (dimmed)".
Displaying the VU level indicator
1
Turn off the unit.
2
Press and hold PS until "VU" appears in the display.
3
Press + or - to select "ON" or "OFF".
4
Press PS.
7
ENGLISH
CARD REMOTE
CONTROL
Names of parts
PS
1 TUNER button
2 CD button
3 rAMS (Auto music sensor) button
4 tAMS (Auto music sensor) button
5 PS (preset) button
6 TUNING UP/DOWN buttons
7 VOLUME +/- buttons
Preparations
A lithium battery is installed in the remote control at the
factory.
Before you use the remote control, be sure to remove
the insulating sheet by simply pulling it out.
Remote control (back)
Insulating sheet