Télécharger Imprimer la page

Aiwa CDC-X937 Mode D'emploi page 7

Publicité

Les langues disponibles

Les langues disponibles

To
Eject a CD
Skip to the next track
Go back to the beginning
of the current track
Each extra press skips
backward one extra track
Locate a specific point in
a track
* When you remove the CD, the front panel will be
closed automatically after a while.
To close the front panel manually, press the panel
upward.
Notes
• When you play a CD that is already inserted, CD play
starts at the point where it stopped the previous time.
A newly inserted CD starts from the first track.
• A CD-R or CD-RW may take some time to start playing
back, but this is not a malfunction.
• If a CD-R or CD-RW with no data is inserted,
"ERROR03" will appear on the display. (See the section
"TROUBLESHOOTING".) The unit cannot play such
discs.
Intro Play
You can locate a desired track by monitoring the first 10
seconds of all the tracks on a CD.
1
Press INT during CD play.
"INTRO" appears on the display.
2
Press INT again when the desired track is played.
The unit returns to normal CD play.
One Track Repeat Play
You can play a track repeatedly.
1
Press REP1 during CD play.
"REP1" appears on the display.
To cancel One Track Repeat Play, press REP1 again.
Shuffle Play
You can play all the tracks in random order.
1
Press SHUF during CD play.
"SHUF" appears on the display.
To cancel Shuffle Play, press SHUF again.
Note
During Shuffle Play, pressing r allows you to skip
only to the beginning of the current track, not to the
previous track.
Press
z*
t
r
Press and hold r or
t until you find the
point.
AUXILIARY EQUIPMENT
Listening to a cassette/MD/MP3
portable player or other equipment
You can listen to music through equipment connected to
the unit. Refer to the operating instructions for the
corresponding equipment for more detailed information.
Be sure to remove any loaded CD to prevent possible
damage to the unit before connecting the equipment.
SRC(SOURCE)
1
Connect a cassette/MD/MP3 portable player or other
equipment via the unit's AUX IN jack (3.5 mm dia.).
2
Press SRC (SOURCE) repeatedly until "AUX IN"
appears on the display.
Note
When a connecting cord is plugged into the AUX IN jack,
you cannot insert or eject a CD even if you press z. Be
sure to disconnect the cord before inserting or ejecting
the CD. Likewise, be sure to disconnect it before you
turn off the ignition switch, otherwise the front panel
won't be retracted.
AUX IN jack
6
ENGLISH

Publicité

loading