Operation; Operation Instructions; Connection Of Dust Collector To Machine; Switch Unit - HOLZMANN MASCHINEN ABS 850 Mode D'emploi

OPERATION

Device to be operated in a perfect state only. Inspect the device visually every time it is to be
used. Check in particular the safety equipment, electrical controls, electric cables and screwed
connection for damage and if tightened properly. Replace any damaged parts before operating
the device.

15.1 Operation instructions

Perform all machine settings with the machine being
 Place the machine next to the woodworking machine in a way that it will
not interfere with your work!
 Start to work with the woodworking machine only until the dust collector
has reached full speed!

15.2 Connection of dust collector to machine

Dust collector plug ABS 850: Ø 100mm
Ensure dust collector tubes to be composed of hardly inflammable material and antistatic.
The total distance between dust collector hood of the ABS 3000/4000/5000 and machine dust
collector hood shall not exceed 10 meters.

15.3 Switch unit

On-off-switch:
Press green button (I): turn on
Press red button (0): turn off
EMERGENCY-switch:
The flap of the switch unit must always be
opened during operation!
For emergencies push on the red cap. The
machine switched off immediately!
HOLZMANN MASCHINEN GmbH
WARNING
disconnected from the power supply!
www.holzmann-maschinen.at
HINWEIS
OPERATION
28
ABS 850