Publicité
Les langues disponibles
Les langues disponibles
4.6
FLASHING KIT
The insert can be equipped with
a fl ashing kit to close off most
appliance openings. Mount the
fl ashing inside the unit's outer
shell using 4 securing screws. The
fl ashing and trim are available in
many fi nishes to accent any room
decor. Objects placed in front of
the appliance should be kept a
minimum of 48" (1219mm) away
from the front face.
4.7
FLUSH LOUVRE KIT, GI-1L (USED ONLY WITH S3600SB)
UPPER LOUVRES
Insert the back edge of the upper louvre into the
upper louvre clips, as shown.
LOWER LOUVRES
Secure the lower louvre assembly to the insert, using
the 4 screws supplied, as shown.
4.8
LOGO PLACEMENT
Remove the backing of the logo supplied and place on the glass viewing door,
as indicated.
TRIM
FLASHING
SECURING SCREWS
LEVELING
SCREW
PIEZO
IGNITOR
VARIABLE SPEED SWITCH
UPPER LOUVRE
LOUVRE CLIP
FLAME
SECURING SCREWS
ADJUSTMENT
KNOB
GAS KNOB
SIDE VIEW
½"
(12.7mm)
LOGO
97.1A
W415-1363 / 11.14.14
13
ON/OFF SWITCH
EN
½"
(12.7mm)
Publicité
