Table Des Matières; Specifications - TECHCON SYSTEMS TS5420 Manuel D'utilisation

Contents
1. Specifications........................................................................................... 3
2. Unpacking and inspection....................................................................... 4
3. Description ............................................................................................... 4
4. Theory of operation ................................................................................. 4
5. Setup instructions.................................................................................... 5
6. Typical system setup............................................................................... 6
7. Trouble shooting...................................................................................... 7
8. Maintenance and cleaning....................................................................... 8
9. Spare parts and accessories................................................................... 10
10. Warranty.................................................................................................. 12
Techcon Systems is an OK International Brand
Copyright © All Rights Reserved • TS941 Rev 04/04
3
1.

Specifications

Size: 4.4" (112mm) long; 1.1"(28.5mm) diameter
Weight: TS5420 = 0.3 lb (136g)
TS5420SS = 0.5 lb (227g)
Fluid inlet port: 1/8" NPT female
Fluid outlet port: Male luer lock
Air inlet port: 10-32 UNF-2B
Maximum fluid pressure: 300 psi (20.7 bars)
Minimum air pressure required: 70 psi (4.8 bars)
Wetted parts: TS5420 = 303 stainless steel, Teflon®, EPR,
Anodized aluminum.
TS5420SS = 303 stainless steel, Teflon®, EPR
Operating frequency: Exceeds 400 cycles/min.
Flow rate at 100 psi (water): 1680 ml/min.
Material viscosity range: Up to 100,000 Cps.
Dimensions are in inches (mm)
Figure 1.0
Techcon Systems is an OK International Brand
Copyright © All Rights Reserved • TS941 Rev 04/04
4