Winix HR1000 Manuel D'utilisation page 4

All manuals and user guides at all-guides.com
CONTROLS
Air
Outlet
Vent
Light Sensor
Detects the amount of
ambient light within
the environment, to
adjust the brightness
of the LED indicators.
Smart Sensor
Automatically
detects indoor air
quality.
Wi-Fi Button
Enables or disables
Wi-Fi function.
Mode / Fan Speed Button
Every time the Mode button is
pressed, the Mode LED light will
cycle through the settings. (Auto,
Sleep, Low, Medium, High, Turbo)
Wi-Fi Strength Indicator
Displays the strength of the Wi-Fi
connection.
English
WINIX SMART
Indicator
LED light indicates
when WINIX SMART is
active with your unit.
PlasmaWave® Indicator
Indicates whether
PlasmaWave® is
enabled or disabled.
Power Button
Turns the unit on or
off.
Check Filter
Indicator
LED light indicates
when it is time to
change the filter.
Child Lock Indicator
LED light indicates
whether Child Lock mode
is enabled or disabled.
Timer / Air Quality Button
Press to cycle through and set
desired length of operation (1hr,
4hr, 8hr, [NO TIMER]).
Press and hold for 3 seconds to
enable or disable the Air Quality
light.
PlasmaWave® / Child Lock Button
Enables or disables PlasmaWave®. Press and hold for 3
seconds to enable or disable the Child Lock mode.
Reset Button
After replacing a filter, press
the RESET button for at least
5 seconds.
Timer Indicator
If timer has been set, the LED
light Indicates the set time of
operation.
HR 1000
4