Winix HR1000 Manuel D'utilisation page 18

All manuals and user guides at all-guides.com
Care and Maintenance
SMART SENSOR CARE
After replacing the filters, power on the
unit. Once the unit running, press and
hold the RESET button for 5 seconds.
4. Cleaning the Dust Sensor
For optimal performance of the Dust Sensor, which detects airborne dust and
ultrafine particles, clean it every two months. Clean it more frequently when the unit
is running in a place with high dust levels.
Open the Dust Sensor cover.
Use a damp cotton swab to wipe the
lens and intake area of the Dust Sensor.
x
To clean the sensor area, use only water. Do
not use volatile substances such as alcohol
or acetone.
Wipe away any remaining moisture with
a dry cotton swab.
English
5 seconds
Lens
Cotton
swab
18
HR 1000