Krüger & Matz KMPM5 Manuel Du Propriétaire page 20

All manuals and user guides at all-guides.com
• End call: short press multifunction button.
• Reject call: press and hold the ‚Volume up' button
to reject a call.
• Transfer call: during a phone call, press and hold
‚Volume up' button, call switches to mobile phone.
Press and hold ‚Volume up' button again, call
switches back to earphone.
• Last number redial: in standby status, press
earphone multifunction button twice to redial the
last number. In case of multipoint connection with
two phones, the redial will be performed from the
phone connected first.
• Battery Capacity status: when earphone is
connected to iOS devices, iOS devices shows the
earphone battery power status in the upper right
corner.
Operation
Power on
Power off
Pairing
Standby
Incoming call
Low battery
Charging
Sound quality with apt-X® code
Featuring the apt-X code, the earsets can connect
wirelessly to any apt-X® enabled devices, vastly
improves the quality of Bluetooth streaming, delivering
20
LED Status
Blue LED flashes 2 times
Red LED flashes 2 times
Red LED & Blue LED flashes
alternately
Blue LED flashes 3 times every
5 seconds
Blue LED blinks
Red LED flashes 2 times every
2 seconds
Red LED keep lighting during
charging. Blue LED keep lighting
charging finished
Owner's manual