Télécharger Imprimer la page

AL-KO BLOWER VAC 2400 E SPEED CONTROL Mode D'emploi page 19

Masquer les pouces Voir aussi pour BLOWER VAC 2400 E SPEED CONTROL:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 22
2200 E / 2400 E
Emptying the collection sack
1. Switch off the machine
2. Unplug it from the mains
3. Open the zip on the collection sack
4. Thoroughly shake out the collection sack
5. Close the zip again
In order to empty the collection sack it is not
necessary to remove it from the sack frame.
Emptying the pre-separator
After coarse material has been sucked up (twigs, pine
cones...) the pre-separator must be emptied.
1. Take off the sack frame
2. Empty the pre-separator.
3. Re-attach the sack frame.
If the blowing operation causes material previ-
ously sucked up to be blown out again, the pre-
separator needs emptying.
Maintenance and care
Warning
Injury hazard from moving parts.
Unplug from the mains and wait until the machine
has stopped.
Warning – risk of damage!
Do not use a high-pressure cleaner or running
water to clean the machine.
If the machine develops a fault, have it checked by an
authorized specialist or in a customer service workshop.
„ Check that all nuts, bolts and pins are secure, so
that the machine can safely be operated
„ Exchange any worn or damaged parts
„ Use only original spare parts and accessories
470 602_b
All manuals and user guides at all-guides.com
Changeover lever
Residues of material sucked up can make the change-
over lever stiff to operate.
„ Immediately after using the machine, clear the
changeover lever by moving it back and forth sev-
eral times
Collection sack
„ Frequently check the collection sack for wear or
damaged parts
„ Thoroughly shake out the collection sack. Brush it
out if necessary.
If the collection sack is heavily soiled it may be
washed by hand at 30 °C.
No do use aggressive cleaning agents!
Mains power cable
„ Regularly check the mains power cable; if it is dam-
aged, have it exchanged by an authorized specialist
or in a customer service workshop.
Extension lead
„ Regularly check the extension lead; if it is dam-
aged, exchange it.
Storage
„ Unplug the machine from the mains for storage
„ Store the machine in a dry condition
„ Store the machine out of reach of children and un-
authorized persons
„ Empty the pre-separator and collection sack
Disposal
Do not dispose of old equipment, batteries or
accumulators as household waste!
Machine, packaging, and accessories are made of recycla-
ble materials, and should be disposed of accordingly.
GB
19

Publicité

loading

Ce manuel est également adapté pour:

Blower vac 2200 e