Kohler K-2600 Guide D'installation page 5

Self-Rimming Installation
2. Self-Rimming Installation
WARNING: Risk of personal injury. Metal surfaces are sharp
and can cause severe cuts. Use gloves and handle lavatory
edges carefully.
Cut out the opening by carefully following the pencil line traced
from the template.
Temporarily position the lavatory in the countertop to check fit.
Remove the lavatory.
Drill the faucet holes according to the faucet installation
instructions.
Install the faucet to the countertop according to the
manufacturer's instructions.
Install the drain to the lavatory according to the drain
manufacturer's instructions.
NOTE: When installing the K-7702 drain, use the tapered gasket
supplied with the lavatory instead of the gasket supplied with the
drain.
CAUTION: Risk of product damage. Overtightening the wing
nuts may cause irreparable damage to the lavatory.
Apply bead of sealant around entire underside of lavatory rim
between stud and rim edge.
Place the lavatory into the cut-out hole and position.
Kohler Co.
All manuals and user guides at all-guides.com
Sealant
Stud
Lavatory
5 1018896-2-C