probst BSZ-KH-6.0 Instructions D'emploi page 37

General
3 General
3.1 Authorized use
The device (BSZ-KH) is especially suitable for gripping and transportation of barrier walls (New Jersey-
Profile) with any carrier, like excavator, fork lift truck, or truck loading crane.
Only gripping goods with a maximum conical slope of 6° (in the area of gripping jaws) should be
gripped.
The device is series equipped with:
When gripping of highly conical gripping goods
(> 6 ° inclination) causes a risk of slipping,
only slightly conical (up to 6 ° inclined)
gripping goods (concrete barrier walls) can be
gripped with the device BSZ-KH (Fig. 1 u. 2) .
(Greifbereich der Gummigreifbacken)
Abb. 1
The gripping and transportation of „transition
elements" and "starter and final elements" and
the like is not permitted!
Due to the design of these gripping goods a
safe and centric gripping is not possible at the
load center.
53100411
Lifting eye for attaching to crane hook
•
Automatic release fort he fully automatic switch
•
over from „full" to „empty".
Fig.2
Transition element
8 / 20
Fig.3
Starter and final element
GB