e) unblocking obstructions (wear gloves)
- Turn off the switch and disconnect the plug from the electric outlet.
- Remove branches from the feeding chute.
- Completely unscrew the lever of the obstruction clearance hatch.
- Slightly pivot the door so that you can pull it and then fully pivot downwards.
- Clear all the plant matter jamming the shredder
(check there is no plant matter in the feeding chute and discharge chute).
- Close the hatch (follow instructions in reverse). make sure the lever is fully screwed back down.
(Impossible to restart the shredder if the lever does not press on the contact switch).
- To restart, check that the safety contact switch located under the control box is engaged
1
3
- To restart, check that the safety contact switch located under the control box is engaged (Reference 11,
see & IV)
2
4
12 - EN