Using The Shredder - Pubert DEVOR X 2500E Notice D'utilisation

g) mount the feeding chute
make sure that the 4 m8 nuts are correctly threaded onto the captive screws. Pass the flange of the feeding
chute over the nuts, lower it to slot onto the screws and then tighten the nuts.
a) starting the motor
Connect the extension connector mobile plug to the socket base of the
machine and then connect the other end to the electric outlet socket base.
1
always use a grounded electric outlet socket base.
VI / usIng THe sHredder
2
3
10 - EN