Publicité
Les langues disponibles
Les langues disponibles
ASSEMBLY INSTRUCTIONS
*Please keep this owner's manual for future reference.
*If you have opened the carton and removed all packages, please disregard
the STEP 1. Seethe STEP 2 directly.
STEP 3
1
2
4
A
5
STEP 1
Unpack and identify all parts using the parts list provided.
STEP 2
1) Check each part before using the product. Make sure the gas supply
system is turned "OFF" before assembling. See Figure 1
2) Locate the battery, remove the plastic cover first. Unscrew the rubber cap
of Electric Ignitor, place a AAA battery into the battery case. Make sure the
posit pole ("+") is towards the cap. Screw the cap back to the battery case
tightly. See Figure 2
3)Place the lava rocks evenly in the fire bowl on the top of the firebowl. See
Figure 3
4) Open the storing door on the firebowl for the gas tank.
5) Put the gas tank in the metal stand. Make sure the gas tank sits on the
metal stand completely. Turn the wing screw on the outer part of metal stand
clockwise to secure the gas tank tightly. See Figure 4.5
6) use the connector to assemble the glass cover pay attention to the crew
to protect, not loose phenomenon.
18
See "LP (Liquid Propane) gas supply connection" for tank connection
3
6
WARNING
DO NOT COVER THE IGNITION
SCREEN
When placing the lava rocks into the fire
bowl. Always keep ignition screenvisible.
This screen must be clear and free of
obstructions at all times to insure proper
operation.
The burner of the fire bowl
must be covered by lava
rocks completely.
Otherwise, the flame may be
extinguished occasionally.
See the figure CORRECT
and INCORRECT for
reference.
CORRECT
LP (Liquid Propane) gas supply connection
CYLJINDER VALVE
BLACK COUPLING NUT
turn clockwise to cornect
REGUL ATOR
Screen
Do not place
lava rocks on
screen. Keep
screen clear
INCORRECT
PRESSURE
RELIEF VALVE
BLEED-OFF
VALVE
turn clockwise
to reaeal
19
Publicité
