Costway HW66516 Instructions De Montage page 9

'A' SHELF SEATS IN
FRONT NOTCH
Shelf labelled A sits in front notch of Bracket. Shelf labelled B
sits in back notch. Be sure each shelf slides back as far as
possible before locking shelves into Brackets.
If shelves are installed in the incorrect notch, the front of the
shelves may fall off the Bracket.
If overlapping 3 sections of shelving, use two A sections and one
B section, placing A sections on the outside and gapping the
bridge with the B section. For 4 or more overlapping sections,
continue alternating between A and B sections, placing A
shelves on Brackets before B shelves.
After all shelves are positioned properly, lock shelves into
Brackets by pressing down on the plastic locking clip.
16
'B' SHELF SEATS IN
BACK NOTCH
WARNING!
5
Install Adjustable Clothes Rods
Install Rod Hanger into NOTE: Rod Hanger can be
bottom of Bracket by fixed to either of the 2 sets of
tilting it backward until it slots in Bracket, depending on
locks in place. depth of closet cavity.
Rods can be used
separately or telescoped
together.
OR
After expanding Clothes Rod
to desired length, place into
Rod Hangers and press down
to snap into place.
17