Costway HW66516 Instructions De Montage page 7

2
Hang first two Wall strips
over the Hang Track.
USE ANCHOR
IF THERE IS NO STUD
C - Mark bottom hole of Wall strips.
Drill a pilot hole into the stud or wall anchor if no stud is
available.
D - Fasten screw into stud or wall anchor.
NOTE: No screws are needed in top holes of Wall strips.
E - Clip Track Cover over Hang Track.
12
Hang Wall Strips
TRACK COVER
Position BOTH outside Wall
strips from the right and left
corners by using the smaller
Track Cover for spacing.
HANG RALL
TRACK COVER
Hang another Wall strip on the Track and use one of the Track
Covers to space apart.
Drill a pilot hole and fasten screws in bottom hole of Wall strip.
(Use wall anchor if there is no stud). Place Track Cover over
Track between Wall strips. Repeat Step F for one or two more
Wall strips (if space allows).
TRACK COVER
If the space between the last Wall strip is less than the length of
the Track Cover, you may choose to cut Track Cover with
scissors to fit.
13