Fox The Euro Easy Dome X Mode D'emploi page 3

Assembly
GB
Instructions
1 . Remove the Euro Easy
Dome X from its carryall
and position so that the
central boss is visible lying
down between the ribs.
All manuals and user guides at all-guides.com
2 . Allow the ribs to drop
outwards, causing the
3 . Lift the dome into
central boss to rise up
position and snap each
towards you. Ensure that
joint together.
no material has been
trapped under the joints
on the central boss.
4 . To close each joint simply push inwards
until it locks shut.
IMPORTANT: the joints will snap
together with minimal pressure. If
undue resistance is felt then STOP
and check none of the ribs are
twisted. Work your way around the
dome until all four main ribs are
assembled.
5 . Assemble the porch rib by lifting and
snapping the joint together. Close the
middle joint first, followed by the two outer
joints. Attach the elastic loop over the
central rib and insert onto spigot as shown.
GB