Beha-Amprobe LT-10 Mode D'emploi page 4

Limited Warranty and Limitation of Liability
Your Amprobe/Beha-Amprobe product will be free from defects in material and workmanship
for one year from the date of purchase unless local laws require otherwise. This warranty does
not cover fuses, disposable batteries or damage from accident, neglect, misuse, alteration,
contamination, or abnormal conditions of operation or handling. Resellers are not authorized to
extend any other warranty on the behalf of Amprobe/Beha-Amprobe. To obtain service during
the warranty period, return the product with proof of purchase to an authorized Amprobe/
Beha-Amprobe Service Center or to an Amprobe/Beha-Amprobe dealer or distributor. See
Repair Section for details. THIS WARRANTY IS YOUR ONLY REMEDY. ALL OTHER WARRANTIES -
WHETHER EXPRESS, IMPLIED OR STATUTORY - INCLUDING IMPLIED WARRANTIES OF FITNESS FOR
A PARTICULAR PURPOSE OR MERCHANTABILITY, ARE HEREBY DISCLAIMED. MANUFACTURER
SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES
OR LOSSES, ARISING FROM ANY CAUSE OR THEORY. Since some states or countries do not allow
the exclusion or limitation of an implied warranty or of incidental or consequential damages, this
limitation of liability may not apply to you.
Repair
All Amprobe/Beha-Amprobe returned for warranty or non-warranty repair or for calibration should be
accompanied by the following: your name, company's name, address, telephone number, and proof of
purchase. Additionally, please include a brief description of the problem or the service requested and
include the test leads with the meter. Non-warranty repair or replacement charges should be remitted
in the form of a check, a money order, credit card with expiration date, or a purchase order made
payable to Amprobe/Beha-Amprobe.
In-Warranty Repairs and Replacement – All Countries
Please read the warranty statement and check your battery before requesting repair. During the
warranty period, any defective test tool can be returned to your Amprobe/Beha-Amprobe distributor
for an exchange for the same or like product. Please check the "Where to Buy" section on amprobe.
com or beha-amprobe.com for a list of distributors near you. Additionally, in the United States and
Canada, in-warranty repair and replacement units can also be sent to an Amprobe/Beha-Amprobe
Service Center (see address below).Service Center (see address below).
Non-warranty Repairs and Replacement – United States and Canada
Non-warranty repairs in the United States and Canada should be sent to an Amprobe Service
Center. Call Amprobe or inquire at your point of purchase for current repair and replacement rates.
USA:
Amprobe
Everett, WA 98203
Tel: 877-AMPROBE (267-7623)
Non-Warranty Repairs and Replacement – Europe
European non-warranty units can be replaced by your Beha-Amprobe distributor for a nominal
charge. Please check the "Where to Buy" section on beha-amprobe.com for a list of distributors near
you.
Beha-Amprobe
Division and reg. trademark of Fluke Corp. (USA)
Germany*
In den Engematten 14
79286 Glottertal
Germany
Tel.: +49 (0) 7684 8009 - 0
beha-amprobe.de
*(Correspondence only – no repair or replacement available from this address. European customers please
contact your distributor.)
**single contact address in EEA Fluke Europe BV
All manuals and user guides at all-guides.com
Canada:
Amprobe
Mississauga, ON L4Z 1X9
Tel: 905-890-7600
United Kingdom
52 Hurricane Way
Norwich, Norfolk
NR6 6JB United Kingdom
Tel.: +44 (0) 1603 25 6662
beha-amprobe.com
The Netherlands - Headquarters**
Science Park Eindhoven 5110
5692 EC Son
The Netherlands
Tel.: +31 (0) 40 267 51 00
beha-amprobe.com