Beha-Amprobe LT-10 Mode D'emploi page 10

• Do not allow lamp test probe or antenna to touch energized wires.
• To avoid damages to antenna and personal injury, do not attempt to
bend or use the antenna as a crowbar.
• Do not operate the instrument if the case or the battery door is open.
• Do not use if the instrument appears damaged or doesn't operate
properly. If in doubt, have the instrument serviced.
• The non-contact voltage function is always on. Test on a known live
source within the rated ac voltage range of the product, both before
and after use to ensure the instrument is in good working condition.
Test Functions and Indications:
Test
Lamp test
Pin test
Non-contact voltage detection
Attaching the Antenna
Make sure the switch is securely locked onto the probe before use.
Removing the Antenna
All manuals and user guides at all-guides.com
Indication
Visual
LED on
LED on
LED flashing
Switch
Figure 1: Attaching the antenna
1
Figure 2: Removing the antenna
6
Audio
None
Solid tone
Modulated beep
2