Beha-Amprobe LT-10 Mode D'emploi page 19

Battery
Battery life
Dimensions
(L x W x H)
Weight
Safety compliance
EMC compliance
Certification
MAINTENANCE AND REPAIR
If the instrument fails to operate, check the battery and replace as
necessary.
Do the following:
1. Replace the battery if the tester does not work.
2. If antenna is not working, check the antenna connection. Make sure the
antenna is locked and secured.
3. Review the users manual to better understand how the tester operates.
Except for the replacement of the battery, repair of the tester should
be performed only by an authorized service center or by other qualified
instrument service personnel.
The front panel and carrying case can be cleaned with a mild solution of
detergent and water. Apply sparingly with a soft cloth and allow to dry
completely before using. Do not use aromatic hydrocarbons, gasoline or
chlorinated solvents for cleaning.
All manuals and user guides at all-guides.com
1 x 9V lithium or alkaline battery only,
6LR61/6LF22/MN1604 or equivalent
500 tests (alkaline typically)
Approximately 170 x 40 x 24 mm
(6.69 x 1.57 x 0.94 in)
Approximately 80 g (0.18 lb)
with battery installed
IEC 61010-1, UL 61010-1
CAN/CSA-C22.2 No. 61010-1-2004
IEC 61326-1
CSA and CE
15