Publicité
Les langues disponibles
Les langues disponibles
Airflow balancing
Balancing must be completed using the Fantech Programmable Touch
Screen Wall Control
ENTERING BALANCING MODE
In the options menu during the initial 5 second countdown
sequence, long press on "ECO" area for 5 seconds to
enter basic balancing mode. The supply and exhaust
fans are adjusted on high speed only and the offsets
are proportionally applied to the medium and low speed
automatically.
AUTO
OPTIONS
AUTO
OPTIONS
NEXT
STAGE 1
(ADJUST LEVEL OF EXHAUST FAN IN HIGH
SPEED):
• In this step, balance exhaust fan and
measure airflow on the exhaust air side
MANUAL
• Pressing on "up" or "down" will adjust the fan
speed in increments of 1%.
• Once the desired exhaust airflow is reached,
press on "next" and move on to the next
stage.
STAGE 2
(BALANCE SUPPLY FAN ONLY IN HIGH
SPEED):
• In this step, balance supply fan and measure
airflow on the supply air side
• Pressing on "up" or "down" will adjust the fan
MANUAL
speed in increments of 1%.
• Once happy with the outcome, press on
"next" to complete balancing
• The supply and exhaust offset values will be
proportionally applied to low and medium
speed as well.
AUTO
MANUAL
OPTIONS
0 %
ADJUST
NEXT
AUTO
MANUAL
OPTIONS
0 %
BALANCE
NEXT
13
Publicité
