Eco-De ECO-808 X-BIKE TOP Manuel D'instructions page 18

INSTRUCTION
1. When install batteries and power on, LCD will display all segments then enter into the SCAN function mode
after one second. Press the MODE key to select the nextfunction.
2. LCD display function Order: SCAN >TMR > SPEED > DIST >CAL > SCAN.
3. When there is signal transmitted to the console without pressing any key, all function TMW/SPD/DST/CAL
will start to count up automatically.
4. TMR – Press the SET key to set target time, the increment is 1:00 minute each time; If TIME count down to
0:00 from target value, console will stop and 0:00 is flashing for reminder, press any key to stop it. Then Time
will start to count up.
5. SPD – User cannot preset SPEED. When there is signal transmitted to the console, LCD will display current
exercising speed.
6. DST - Press SET key to set target distance, the increment is 1.0 m each time. If DISTANCE counts down to 0.0
from target value, console will stop and 0.0 is flashing for reminder, press any key to stop it. Then DISTANCE
will start to count up.
7. CAL – Press SET key to set target CALORIES, the increment is 1.0cl each time. If CALORIE counts down to 0.0
from target value, console will stop and 0.0 is flashing for reminder, press any key to stop it. Then CALORIE
will start to count up.
Remark:
1.Without any signal been transmitted into the monitor for 4 minutes, the monitor will enter to Standby
mode.
2. STOP SIGNAL-STOP signal will light up when SCAN function is under executing.
Trouble shooting:
. When the display of LCD is weak, it means the batteries need to be changed.
. If there is no signal when you pedal, please check if the cable is well connected.
PRODUCT SPECIFICATION
Model: ECO-808
N.W/G.W:17/19.5KG
Max User Weight: 120KGS
Product Size: 1180X535X970 mm
Made In PRC
All manuals and user guides at all-guides.com
- 18 -