Eco-De ECO-808 X-BIKE TOP Manuel D'instructions page 15

HARDWARE PACKING LIST
1. Socket head cap screw
2. Curved gasket
ASSEMBLY INSTRUCTIONS
1. Install the Ball Pin.
Pull the ball pin out to expand the main frame.
2. Install the Front and Rear Stabilizers.
Loose the screws in the stabilizer, and insert them
into the corresponding grooves and tighten in each
stabilizer.
3. Install the Handlebar and Control Panel
All manuals and user guides at all-guides.com
3. Install the Handlebar and Control Panel
Place the handlebar onto the corresponding grooves
in the main frame, tighten it with bolts and gaskets.
Connect the cords with the corresponding slots, and
then place the control panel onto the main frame and
tighten.
4. Install the Left and Right Pedals.
Attach the left/right pedal onto corresponding axles
(left pedal with left-hand thread, right pedal with
right-hand thread).
- 15 -
Spanner