Publicité
Les langues disponibles
Les langues disponibles
5. Install the Back Handlebar and Seat Cushion.
Loose the nylon nut and washer, place the back
handlebar onto the triangle plate and tighten.
Place the seat cushion onto the plate and tighten.
OPERATING INSTRUCTIONS
CAUTION:
Don't adjust the height of the seat post over
the "STOP" marking shown on the seat post.
Or it is dangerous.
All manuals and user guides at all-guides.com
6. Install the Seat Post.
Place the seat post onto the main frame and tighten.
NOTE: When adjusting the height of seat post, the
maximum insert depth of mark line
cannot be higher than the edge of bushing.
TENSION ADJUSTMENT
For tension adjustment, simply use the tension
adjustment knob (18) found beneath the Computer.
To increase tension, turn clockwise (+), to decrease
tension, turn anti-clockwise (-).
It sets the lowest magnetic force on the level 1
It sets the highest magnetic force on the level 8.
- 16 -
Publicité
