Twin-Star International 32IMM4787 Manuel D'instructions page 6

4. Insert one wood dowel (CC) into each of the
pre-drilled holes on the top edges of the assembly
from step 3. Then locate mantel/top (G) and lay
finished side up on top of completed assembly.
From the inside, attach mantel/top (G) using bolt (AA)
and washer (BB) through the pre-drilled holes in the
mounting blocks (Fig.4).
HAND TIGHTEN ONLY.
Using Phillips screwdriver tighten all bolts alternating
top and bottom, left and right.
Hardware Used
AA Bolt
BB Washer
Wood Dowel
CC
5. Rest back panel (I) on mantel top back edge. Allow
the pre-installed magnets to keep the back panels in
closed position (Fig.5).
6. There are levelers located on the bottom of the
front wood feet. The height can be increased by
twisting counter-clockwise (Fig.6).
All manuals and user guides at all-guides.com
x 10
x 10
x 6
5
Fig. 4
CC
BB
AA
Fig. 5
Fig. 6
G
I