Twin-Star International 32IMM4787 Manuel D'instructions page 5

ASSEMBLY INSTRUCTIONS
1. Locate the left side cabinet (B), right side cabinet (C),
center front panel (D), and place face down on a
scratch-free surface. Insert one wood dowel (CC) into
each of the pre-drilled holes. Push the left side cabinet
(B) and right side cabinet (C) snug to the center front
panel (D). Make sure the wood dowels (CC) are
inserted into the pre-drilled holes. Connect the left side
cabinet (B), right side cabinet (C) and center front
panel (D) with connection plates, tighten screws (DD)
through the pre-drilled holes (Fig.1).
Hardware Used
Wood Dowel
CC
DD Screw
2. Locate hearth/base (A) and place finished side up
on the floor. Insert one wood dowel (CC) into each
of the pre-drilled holes. Attach the completed
assembly from step 1, left lower support panel (E)
and right lower support panel (F) to the hearth/base
(A). Using bolts (AA) and washers (BB) attach
panels through pre-drilled holes in the mounting
blocks (Fig.2).
HAND TIGHTEN ONLY.
Hardware Used
AA Bolt
BB
Washer
Wood Dowel
CC
3. To secure center lower front panel (H) to the cabinet,
insert bolt (AA) through washer (BB) into the pre-
drilled holes in the cabinet then tighten (Fig.3).
Hardware Used
AA Bolt
BB
Washer
All manuals and user guides at all-guides.com
x 4
x 2
x 12
x 12
x 10
x 5
x 5
4
Fig. 1
D
CC
C
Fig. 2
AA
E
BB
Fig. 3
H
CC
DD
B
A
F
CC
BB
AA